Fence Contractor in Aurora, Illinois
Diamond Fence Corp. installs vinyl, wood, aluminum ornamental, chain-link, and commercial security fencing for homes and businesses throughout Aurora and the Fox Valley. We handle the Aurora fence permit and your HOA submittal as part of the job.
Fence Installation in Aurora
Aurora is two fence markets in one city. The established West Side and East Side carry aging wood and chain-link past its service life, which drives a steady replacement cycle, while the newer Far East Side and Fox Valley subdivisions generate first fence demand for privacy, pets, and pools. We also install perimeter and security fence along the I-88 industrial corridor.
Diamond Fence Corp. is owned and run by Dario Luna, with over 10 years installing fence across Illinois. You meet the owner, not a call center, and one accountable crew does the work from measurement through final walkthrough. We are a service-area company based in Palatine with no showroom, open Monday through Friday, 9 AM to 6 PM.
Fence Materials We Install in Aurora
| Material | Maintenance | Lifespan | Privacy | Best for |
|---|---|---|---|---|
| Vinyl | Very low. No staining or painting. | Long | Full privacy in solid panel | Backyard privacy, pets, Fox Valley subdivisions |
| Wood | Higher. Periodic staining or sealing. | Moderate, longer with sealing | Full privacy in board on board | West Side and East Side streetscapes |
| Aluminum ornamental | Very low. Powder coat resists rust. | Long | Open by design | Front yards, corner lots, pool barriers |
| Chain-link | Low. Galvanized or coated. | Long | Open. Slats optional. | Pet containment, I-88 commercial perimeters |
Vinyl Privacy Fences
Vinyl privacy fencing is our lead product and fits Aurora's Fox Valley subdivisions well. It handles our freeze and thaw cycles with almost no upkeep. See our vinyl fence page.
Wood Fences
Cedar wood fence suits the streetscape in Aurora's established East Side and West Side neighborhoods. We build it finished side out, as Aurora requires.
Aluminum (Ornamental) Fences
Aluminum ornamental fencing is the pick for Aurora front yards, corner lots, and pool barriers where open styles are required. It suits the estate homes around Stonebridge and White Eagle.
Chain-Link Fences
Chain-link handles secure pet containment and commercial perimeters along the I-88 corridor. Galvanized and coated options available.
Commercial and Security Fencing
We install perimeter, gate, and security fence for Aurora warehouses, business parks, and multifamily properties, including full replacement of a failing commercial line.
Aurora Fence Permit Requirements
| Requirement | What applies in Aurora |
|---|---|
| Permit required | Yes, for every fence. Aurora exempts nothing, including small residential fences. |
| Height, rear and side yards | Generally up to 6 feet. |
| Front yard | Reduced height, commonly cited as roughly 42 inches. Open styles allowed taller than solid. A tall solid privacy fence across a front yard is generally not permitted. |
| Corner lots and vision triangle | Height limited to roughly 3 feet within the triangle unless the fence is set back. |
| Setback from property line | Fence must sit on your own property. Sidewalk and right of way setbacks apply. |
| Finished side out | The good side faces your neighbors and the street. |
| Plat of survey | Current, drawn to scale, showing the proposed fence location. The most common reason an Aurora application stalls. |
| Barbed wire and electric | Generally prohibited for residential use. |
| Contractor registration | Aurora requires fence contractors to register with the city and carry a surety bond and certificate of insurance. |
| Filing | Online through the city portal, reported as eTRAKiT. |
| Final inspection | Mandatory once the fence is up. We coordinate it. |
| Who files it | Diamond files the submittal. |
Plan on weeks rather than days for review, running alongside any HOA approval. The rule is published in Aurora Unified Development Ordinance 4.7.9. We confirm the current rule for your property and file the permit.
Aurora generally requires a permit, site plan, and barrier inspection for pools over a reported 24 inches deep. That means an enclosing fence with a self closing, self latching gate that swings away from the pool, plus limits on gaps. Aluminum ornamental is a common compliant choice, and we confirm the exact specification against the city's residential pool permit materials.
HOA and Architectural Review in Aurora
Aurora is HOA dense across the Far East Side and Fox Valley, especially the golf and estate communities like Stonebridge, White Eagle, Orchard Valley, and Oakhurst. Covenants there routinely run stricter than city code, and HOA approval usually needs to be in hand before or alongside the city permit. We prepare the package so it goes in complete the first time.
A committee typically asks for:
- A site plan showing the fence location
- An elevation or product drawing
- Material and color
- Height
- Style approval for your specific street
What Affects the Cost of a Fence in Aurora
| Material | Relative cost | What you get |
|---|---|---|
| Chain-link | Most affordable | Galvanized or coated mesh, open by design |
| Wood | Affordable | Traditional cedar privacy, stain or paint to match |
| Vinyl (privacy) | Mid-range | Solid low maintenance panels, our lead product |
| Vinyl (decorative tops) | Higher-end | Full privacy below, picket or lattice accent above |
| Aluminum ornamental | Premium | Powder coated, rust resistant, open picket styling |
Cost drivers on an Aurora property:
- Linear footage. The biggest driver. Longer runs share setup and labor.
- Height. Taller fence needs more material and heavier posts.
- Gate count. Every walk and drive gate needs its own posts, hinges, and latch.
- Terrain and grade. Slope, rock, and tree roots change the layout.
- Tear-out and haul-away. Replacement prices differently from a first fence.
- Access. Older West Side and East Side lots have narrow side yards, alley access, and mature trees.
- Permit handling. Aurora requires one on every fence.
A free on-site measurement is how you get a written figure for your property.
Our Fence Installation Process
Free on-site estimate.
We measure your Aurora property and you meet the owner.
Material and design guidance.
Height and style that fit your HOA and Aurora's code.
Written quote.
Typically about one day after we measure.
Permit and HOA package.
We file the Aurora permit with your plat of survey and prepare the HOA drawings.
J.U.L.I.E. 811 locate.
We arrange utility locating before any digging. J.U.L.I.E. marks public lines to the meter, so tell us where private lines run (irrigation, pet fence, landscape lighting, pool equipment).
Installation.
Posts set in concrete below the local frost line, roughly 42 inches in the Chicago area, so the fence does not heave after a hard winter. Most yards install in one to two days.
Final inspection and walkthrough.
We coordinate the city's inspection and walk the fence with you.
Full project runs roughly three to four weeks from deposit, covering permit review, HOA approval, material lead time, and scheduling. The crew is on site for only a couple of days of that.
Aurora Neighborhoods and Areas We Serve
We also serve Arlington Heights, Barrington, Buffalo Grove, Crystal Lake, Hoffman Estates, Inverness, Long Grove, Schaumburg, and Wheeling.
- Aurora
- Arlington Heights
- Barrington
- Buffalo Grove
- Crystal Lake
- Hoffman Estates
- Inverness
- Long Grove
- Schaumburg
- Wheeling
- Naperville
- Oswego
- Batavia
- Geneva
- Far East Side and Fox Valley: Fox Valley Villages, Stonebridge, White Eagle, Oakhurst, Eola Yards, Pacifica
- West Side and Kendall side: Orchard Valley, Lakewood Creek, Lakewood Valley, Boulder Hill, Carillon Club, Churchill Club
- Established neighborhoods: West Side and East Side near downtown, the Fox River riverfront, Phillips Park
- Commercial: I-88 corridor, Butterfield Center for Business and Industry, Ferry Road business parks, Chicago Premium Outlets area
- Counties: Kane, DuPage, Will, and Kendall
- Aurora ZIP codes: 60502, 60503, 60504, 60505, 60506, 60507
- Nearby towns: Naperville, North Aurora, Montgomery, Oswego, Batavia, Geneva, Sugar Grove, Yorkville
Aurora Fence FAQ
Do I need a permit to build a fence in Aurora, IL?
Yes, for every fence, with no exemption for small residential fences, plus a mandatory final inspection. We prepare and file the submittal for you.
How tall can a fence be in Aurora?
Rear yard fences are generally allowed up to 6 feet. Front yards are restricted to roughly 42 inches, and corner lots have tighter sight line limits. We confirm the current figure for your address before quoting a height.
How close to the property line can I put a fence in Aurora?
Your fence has to sit on your own property, and sidewalk and right of way setbacks apply. That is why Aurora requires a current plat of survey, and we work from yours.
What are the fence rules for a corner lot in Aurora?
Corner lots have a vision triangle where height is limited to roughly 3 feet unless the fence is set back. Open styles like aluminum ornamental typically work there.
Which side of the fence faces my neighbor in Aurora?
The finished side. Aurora requires the good side to face outward toward neighbors and the street, with posts and rails on your side.
Do I need a plat of survey to get a fence permit in Aurora?
Yes, a current one drawn to scale showing the proposed fence location. Missing surveys are the most common reason an Aurora application stalls.
How do I get HOA approval for a fence in Aurora?
Most Aurora subdivisions with an HOA require architectural review first. Start early, because committees meet on a schedule and approval is usually needed before or alongside the city permit. We prepare the package.
How deep do fence posts go in Aurora?
We set posts in concrete below the local frost line, roughly 42 inches in the Chicago area, so the fence stays plumb through freeze and thaw.
What fence do I need around a pool in Aurora?
Aurora generally requires a permit, site plan, and barrier inspection for pools over a reported 24 inches deep, with a self closing and self latching gate that swings away from the pool. Aluminum ornamental is a common compliant choice.
How long does fence installation take in Aurora?
The install is typically one to two days for most yards. The full process runs roughly three to four weeks from deposit, including permit review and HOA approval.
Get Your Free Fence Estimate in Aurora
Call Diamond Fence Corp. at +1 224-407-7409 or request a free on-site estimate for your Aurora property. We measure, handle the permit and HOA package, and send a written quote about a day later. Monday through Friday, 9 AM to 6 PM.
Explore more: vinyl fence, wood fence, aluminum fence, chain-link fence.
+1 224-407-7409